Assessed from your plans

NatHERS certificates for building approval

An accredited assessor models your plans, tells you what is needed to reach the required star rating and issues the NatHERS certificate for your certifier.

In short

A NatHERS assessment rates the thermal performance of a new home from its plans, on a scale of 0 to 10 stars. Most states require new homes to reach 7 stars under the National Construction Code 2022. An accredited assessor models the design in NatHERS software and issues a certificate.

Checked against official sources · Reviewed 16 November 2026

General information only, not legal advice. Rules differ between states and change. Check the official source linked on this page before you act.

What a NatHERS assessment is

The Nationwide House Energy Rating Scheme measures how much heating and cooling a home needs to stay comfortable, based on its design, materials, orientation and local climate. The result is a star rating from 0 to 10. The assessment is done in accredited software from the plans, before the home is built.

When you need one

  • New houses, townhouses and apartments. Usually required with the building permit or construction certificate application.
  • Major renovations and additions. Depending on the state and the scope of work.
  • In New South Wales. A NatHERS assessment is the usual way to complete the thermal performance section of a BASIX certificate.

What changes the rating

Orientation, window size and glazing, insulation in the ceiling, walls and floor, the floor type, shading, ceiling fans and how well the home is sealed. Small changes at design stage are far cheaper than changes on site, so an early assessment pays for itself in avoided rework.

Whole of Home

Since the National Construction Code 2022, most states also require a Whole of Home assessment, which looks at the energy used by heating and cooling equipment, hot water, lighting, pool pumps and any solar. It is usually done by the same assessor at the same time.

For the position in each state, including adoption dates, see energy rating rules by state.

How it works

From booking to report

  1. 01

    Book and upload plans

    Send floor plans, elevations, sections and the window schedule. See the fixed price and pay online.

  2. 02

    Design is modelled

    An accredited assessor builds the home in NatHERS software using the climate zone for your site.

  3. 03

    Advice on reaching the target

    If the design falls short, you get a list of changes that would lift it, such as insulation or glazing.

  4. 04

    Certificate issued

    You receive the NatHERS certificate and stamped plans for your building surveyor or certifier.

What you receive

  • Thermal performance modelling in accredited NatHERS software
  • A NatHERS certificate with a QR code for verification
  • Specification notes showing what the rating relies on
  • Guidance on changes if the first run does not reach the target

Where it applies

NatHERS assessment by state

The rule that drives demand for this service in each state where we offer it. Open a state for the detail and sources.

StateStatusWhat applies
Australian Capital TerritoryIn forceNew homes are assessed under the National Construction Code energy efficiency provisions as adopted in the ACT.
VictoriaIn forceNew homes must meet the 7-star NatHERS standard and the Whole of Home requirement under the National Construction Code 2022 as adopted in Victoria.
New South WalesIn forceNew homes and many renovations need a BASIX certificate. The thermal comfort part of BASIX is usually met with a NatHERS assessment at the 7-star standard, which applied from 1 October 2023.
QueenslandIn forceNew homes must meet the 7-star standard under the National Construction Code 2022, which applied in Queensland from 1 October 2023.
South AustraliaIn forceNew homes are assessed under the National Construction Code energy efficiency provisions as adopted in South Australia.
Western AustraliaIn forceNew homes must meet the 7-star standard under the National Construction Code 2022, which applied in Western Australia from 1 May 2025.
TasmaniaIn forceTasmania did not adopt the 7-star standard in the National Construction Code 2022. New homes are assessed against the energy efficiency provisions that apply in Tasmania.
Northern TerritoryVoluntaryAdoption of the National Construction Code 2022 energy efficiency provisions for homes is voluntary in the Northern Territory.

Questions

NatHERS assessment: common questions

Do I need a NatHERS certificate?
NatHERS is the most common way to show a new home meets the energy efficiency rules in the National Construction Code, though other compliance pathways exist. Your building surveyor or certifier will tell you which they accept.
What star rating do I need?
Most states adopted the 7-star standard in the National Construction Code 2022. Tasmania did not adopt it and the Northern Territory made it voluntary. Check the rule for your state before finalising your design.
Who can do a NatHERS assessment?
For a certificate to carry the NatHERS mark, the assessor must be accredited by a NatHERS accrediting organisation, which include ABSA, Design Matters National and HERA.
Is the assessment done on site?
No. A new-home assessment is done from the drawings, which is why it can be completed for a site anywhere in Australia.

Need an assessment booked?

Choose the service, tell us about the property and pay online. An accredited assessor does the work and your report arrives by email.

Rules by stateBook now